|
Does not apply to labeled or cased opening frames.
|
||||||||||||
|
TO DETERMINE ROUGH OPENING:
ADD 2" TO DOOR OPENING WIDTH ADD 1" TO DOOR OPENING HEIGHT e.g., For a 3068 door opening, the rough opening is: 38" x 81" |
||||||||||||
|
|
||||||||||||
 |
STEP 1
A. Begin installation by pushing the top of one jamb over the wall. B. Hold the top in place then push the bottom in toward and over the wall. |
|||||||||||
|
|
||||||||||||
 |
STEP 2
A. Position frame head over wall. B. Align head tabs with jamb slots then slide head toward jamb and engage tabs in slots. |
|||||||||||
|
|
||||||||||||
 |
STEP 3
A. Push the top of the remaining jamb over wall and mate jamb slots and head tabs. B. Push the bottom of this jamb in toward and over the wall. C. Level the head. |
|||||||||||
|
|
||||||||||||
 |
STEP 4
A. Insert screwdriver into top plumb anchor screws. Alternately adjust top plumb anchors until they bear firmly against studs. B. Plumb hinge jamb and fasten at sill.* C. Place a temporary wood spreader between jambs at sill. Adjust strike jamb to fit firmly against spreader and fasten at bottom of this jamb.* D. Adjust intermediate plumb anchors (if present) until they too bear firmly against studs. E. Install mutes in holes provided in door stops. |
|||||||||||
|
*Some installers prefer to hang door and fit frame to door prior to anchoring at sill.
|
||||||||||||
|
|
||||||||||||
 |
||||||||||||
 |
||||||||||||
|
1 = Insert fasteners (not included) and fix jamb to wall framing.
|
||||||||||||
|
|
||||||||||||